This is a Qmark electric unit heater. The heater voltage is 480VAC, the frequency is 60 hertz, and the amps AC is 6.0. The BtuH is 17,000 and the temperature rise is 45 degrees Fahrenheit. The air flow is 350 cubic feet per minute (CFM). The overall width is 14 inches, the overall depth is 7-1/2 inches, the overall height is 16 inches. The housing is made of 20 gauge steel.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. There are some dents on the right side of the unit and one of the louvers is bent. There are also some cosmetic scuffs and scratches around the housing. Please refer to the photos for more information.
Made in USA
|Item||Electric Unit Heater|
|Electric Heater Phase||3|
|Heater Mounting Type||Vertical or Horizontal|
|Temp. Rise||45 Degrees F|
|Air Flow||350 cfm|
|Horizontal Air Throw||12 ft.|
|Vertical Floor Coverage||9 ft.|
|Vertical Mounting H||9 ft.|
|Housing Material||20 ga. Steel|
|Housing Finish||Polyester Powder Coated|
|Contactor Coil Voltage||24|
|Requires||Mounting Bracket, Two-Stage Thermostat (Not Included)|