This is a Zoeller sewage ejector pump. Please refer to the technical specifications in the listing for more information.
We have inspected this item and it powers on when plugged in. We do not have the capability to install the unit to test it any further. It is missing some bolts to hold the top of the pump to the base and the top bar for the float appears to be bent down. There are also some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing. Made in USA.
Technical Specs
| Item | Sewage Ejector Pump |
| Manufacturer Part Number | M267 |
| Switch Actuation | Vertical Float |
| Switch Electrical Connection | Integral |
| HP | 1/2 |
| RPM | 1,725 RPM |
| Rated Voltage | 115V AC |
| Phase - Pumps | 1 |
| Amps | 10.40 A |
| Motor Type | Hermetically-Sealed; Oil-Filled |
| Body Material | Cast Iron |
| Impeller Material | Thermoplastic |
| Shaft Seal Material - Pumps | Ceramic; Carbon |
| On Point | 12 in |
| Off Point | 5 in |
| Flow Rate @ 10 Ft. of Head | 85 gpm |
| Flow Rate @ 15 Ft. of Head | 45 gpm |
| Flow Rate @ 20 Ft. of Head | 10 gpm |
| Max. Diameter Solids | 2 in |
| Min. Sump Pit Dia. | 18 in |
| Body Dia. | 13-1/16 in |
| Overall Height | 14-9/32 in |
| Cord Length | 10 ft |
| Discharge | 2 in FNPT |
| Max. Liquid Temp. | 130 °F |
| Max. Head | 21.5 ft |
| Duty Cycle | Continuous |
| Thermal Protection | Yes |