This Zoeller Waste-Mate series 1/2 HP submersible sewage ejector pump (Model G267-H) is designed for raw sewage and wastewater applications. It features a heavy-duty cast iron pump body, non-clogging thermoplastic vortex impeller capable of passing 2-inch spherical solids, and operates on 460V AC 3-Phase power at 1,725 RPM with a 15 ft cord and bare leads for hardwired electrical connection.
We have inspected this item and we do not have the capability to fully test it. There are some cosmetic scuffs and scratches throughout the unit. Impeller spins freely by hand. Untested electrically due to 460V 3-phase power requirement.
Please refer to the photos for more information.
This unit only includes what is photographed in the listing. Made in USA.
Technical Specs
| Item | Sewage Ejector Pump |
| Manufacturer Part Number | G267-H |
| Switch Actuation | No Switch Included |
| Switch Electrical Connection | No Switch Included |
| HP | 1/2 |
| RPM | 1,725 RPM |
| Rated Voltage | 460V AC |
| Amps | 2.0 A |
| Phase - Pumps | 3 |
| Motor Type | Hermetically-sealed; Oil-filled |
| Body Material | Cast Iron |
| Impeller Material | Thermoplastic |
| Shaft Seal Material - Pumps | Ceramic; Carbon |
| Flow Rate @ 10 Ft. of Head | 85 gpm |
| Flow Rate @ 15 Ft. of Head | 45 gpm |
| Flow Rate @ 20 Ft. of Head | 10 gpm |
| Max. Diameter Solids | 2 in |
| Min. Sump Pit Dia. | 18 in |
| Body Dia. | 13-1/16 in |
| Overall Height | 14-9/32 in |
| Cord Length | 15 ft |
| Discharge | 2 in FNPT |
| Max. Liquid Temp. | 130 °F |
| Max. Head | 21.5 ft |
| Duty Cycle | Continuous |
| Thermal Protection | No |
| Country of Origin | USA |