This is a Zoeller sewage ejector pump. Please refer to the technical specifications in the listing for more information.
We have inspected this item and it powers on when plugged in. We do not have the capability to test the unit any further. The plug is bent and the rail for the float is bent down. There are also some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing. Made in USA.
Technical Specs
| Item | Sewage Ejector Pump |
| Switch | Integral Vertical Float |
| Series | Model 264 |
| Manufacturer Part Number | 264-0001 |
| For Media Type | Sewage Water |
| Power Source | Corded Electric |
| Horsepower | 2/5 hp |
| Motor Speed | 1,725 RPM |
| Rated Voltage | 115V AC |
| Frequency | 60 Hz |
| Current | 9.40 A |
| Phase | Single |
| Motor Housing Material | Cast Iron |
| Volute Material | Cast Iron |
| Impeller Material | Thermoplastic |
| Shaft Seal Material | Carbon/Ceramic |
| Flow Rate @ 10' of Head | 60 gpm |
| Max. Head | 18 ft |
| Max. Dia. Solids | 2 in |
| Max. Media Temp. | 130 °F |
| On Point | 12-1/2 in |
| Off Point | 4-1/2 in |
| Duty Cycle | Continuous |
| Cord Length | 9 ft |
| Shaft Seal Type | Single Mechanical |
| Discharge | 2 in FNPT |
| Discharge Orientation | Vertical |
| Min. Sump Pit Dia. | 18 in |
| Hazardous Location Class | Not Rated |
| Requires Control Panel | No Control Panel Required |
| Body Dia. | 13-1/8 in |
| Width at Widest Point | 13-1/8 in |
| Overall Height | 14-3/4 in |