This is a Wheeler-Rex hydrostatic test pump. Please refer to the technical specifications in the listing for more information.
We have inspected this item and it powers on when plugged in. We do not have the capability to test the unit any further. There are some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing. Made in USA.
Technical Specs
| Item | Hydrostatic Test Pump |
| Manufacturer Part Number | 47102 |
| Discharge Connection Size | 3/8 in |
| Discharge Hose Length | 10 ft |
| Discharge Hose Size | 1/2 in |
| Discharge Hose Type | NPT |
| Discharge Connection Type | NPT |
| Maximum Flow Rate | 1.1 gpm |
| Frequency | 60 Hz |
| Max. Gauge Reading | 3,000 psi |
| Intake Connection Size | 3/8 in |
| Intake Connection Type | NPT |
| Intake Hose Length | 10 ft |
| Intake Hose Size | 3/4 in |
| Intake Hose Type | NPT |
| Lubrication | Continuous Oil Bath |
| Nameplate Voltage | 115/220VAC |
| Number of Pistons | 3 |
| Overall Height | 35 in |
| Overall Length | 28 in |
| Overall Width | 17 in |
| Phase | Single |
| Relief Valve Type | Adjustable Pressure |
| Shaft Outer Diameter | 5/8 in |
| Suction Port | 3/8 in NPT |
| Discharge Port | 3/8 in NPT |
| Horsepower (Maximum) | 1-1/2 hp |
| Max. Motor Speed | 3,450 RPM |
| Sub-brand | Wheeler Rex |
| Max. Discharge Pressure | 2,000 psi |
| Pump Design | Triplex Piston |
| Dimensions (LxWxH) | 28 in x 17 in x 35 in |