This is a Weg hazardous location motor. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The motor shaft spins when turned by hand. The grease fitting at the top is broken. There are also some cosmetic scuffs and scratches throughout the unit as well as some paint chipping. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Hazardous Location Motor |
| Manufacturer Part Number | 02018XT3E256T |
| Motor Design | Three-Phase |
| Motor Enclosure Type | Totally Enclosed Fan Cooled |
| Nameplate Horsepower @ 60 Hz | 20 hp |
| Nameplate Voltage @ 60 Hz | 230/460V AC |
| Usable @ 208V | Usable at 208V |
| Nameplate RPM @ 60 Hz | 1,770 RPM |
| Phase | Three |
| Nameplate Service Factor @ 60 Hz | 1.15 |
| Full Load Amps @ 60 Hz | 50.0/25.0 A |
| Frame Size | 256T |
| Frequency | 60 Hz |
| Insulation Class | F |
| Output Shaft (Dia x L) | 1-5/8 in x 4 in |
| Shaft Dia. | 1-5/8 in |
| Shaft Length | 4 in |
| Mounting Type | Rigid Base |
| Motor Shaft Rotation | CW/CCW |
| Motor Thermal Protection | T-Stat |
| Nominal Efficiency | 93 % |
| Number of Speeds | 1 |
| NEMA Design Class | B |
| Hazardous Location Class | Class I; Class II |
| Hazardous Location Division | Division I |
| Bearing Type | Ball |
| Conduit Box Location | Exterior |
| Conduit Box Position | F1 |
| Duty Cycle | Continuous |
| Frame Material | Cast Iron |
| Lead Length | 8 in |
| Length Less Shaft | 20-15/16 in |
| Max. Ambient Temp. | 40 °C |
| Mounting Position | Horizontal |
| Overall Length | 24-15/16 in |
| Shaft Design | Keyed |
| Temperature Code | T3C |
| Usable @ 200V | Not Usable at 200V |
| Motor Application | Hazardous Location |
| CC Number | CC029A |
| Weight | 358 lb |