This is a Weg hazardous location motor. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The motor shaft spins when turned by hand. There are some cosmetic scuffs and scratches throughout the unit as well as some paint chipping. Please refer to the photos for more information.
This unit only includes what is photographed in the listing. Made in USA.
Technical Specs
| Item | Hazardous Location Motor |
| Manufacturer Part Number | 00512ST3QIE215T-W22 |
| Motor Design | Three-Phase |
| Motor Enclosure Type | Totally Enclosed Fan Cooled |
| Nameplate Horsepower @ 60 Hz | 5 hp |
| Nameplate RPM @ 60 Hz | 1,170 RPM |
| Nameplate Voltage @ 60 Hz | 460V AC |
| Frequency | 60 Hz |
| Full Load Amps @ 60 Hz | 6.8 A |
| Phase | Three |
| Usable @ 208V | Not Usable at 208V |
| Nameplate Service Factor @ 60 Hz | 1.25 |
| Duty Cycle | Continuous |
| Frame Size | 215T |
| Insulation Class | F |
| Output Shaft (Dia x L) | 1-3/8 in x 3-3/8 in |
| Shaft Dia. | 1-3/8 in |
| Shaft Length | 3-3/8 in |
| Motor Mounting Type | Rigid Base |
| Motor Shaft Rotation | CW/CCW |
| Motor Thermal Protection | None |
| Number of Speeds | 1 |
| Nominal Efficiency | 89.5 % |
| Length Less Shaft | 16-3/16 in |
| Max. Ambient Temp. | 40 °C |
| Motor Bearings | Ball |
| Motor Frame Material | Cast Iron |
| Motor Mounting Position | Horizontal/Vertical Shaft Down |
| Motor Shaft Design | Keyed |
| Overall Length | 19-9/16 in |
| Usable @ 200V | Not Usable at 200V |
| Motor Application | Hazardous Location |
| CC Number | CC029A |
| Weight | 182 lb |