This is a U.S. Motors hazardous location motor. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The motor shaft spins when turned by hand. There are some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Hazardous Location Motor |
| Manufacturer Part Number | XS1CA1JCR |
| Motor Design | Capacitor-Start |
| Motor Enclosure Type | Totally Enclosed Fan Cooled |
| Nameplate Horsepower @ 60 Hz | 1 hp |
| Nameplate Voltage @ 60 Hz | 115VAC |
| Nameplate RPM @ 60 Hz | 3,450 RPM |
| Nameplate Service Factor @ 60 Hz | 1 |
| Full Load Amps @ 60 Hz | 12.0 |
| Phase | Single |
| Frame Size | 56C |
| Frequency | 60 Hz |
| Insulation Class | B |
| Output Shaft (Dia x L) | 5/8 in x 1-7/8 in |
| Shaft Dia. | 5/8 in |
| Shaft Length | 1-7/8 in |
| Mounting Type | C-Face |
| Motor Shaft Rotation | CW/CCW |
| Motor Thermal Protection | Auto |
| Nominal Efficiency | 72 % |
| Number of Speeds | 1 |
| Hazardous Location Division | Division I |
| Conduit Box Location | Exterior |
| Conduit Box Position | F1 |
| Duty Cycle | Continuous |
| Frame Material | Steel |
| Length Less Shaft | 12-3/16 in |
| Max. Ambient Temp. | 40 °C |
| Mounting Position | Horizontal |
| Overall Length | 14-1/4 in |
| Shaft Design | Keyed |
| Temperature Code | T3C |
| Motor Application | Hazardous Location |
| Weight | 42 lb |