U.S. Motors U15P1AF General Purpose Motor
This industrial three-phase motor delivers 15 HP at 3518 RPM with 230/460V AC operation in a NEMA 215T frame. Features a totally enclosed fan cooled (TEFC) enclosure, rigid base mounting, and a 1-3/8 inch keyed shaft with key.
Inspection & Condition Details:
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The motor shaft spins when turned by hand. There are some deep gouges/scuffs on the outer rear fan cover, surface scuffs on the conduit box, and minor finish wear along the mounting base. The lifting hooks are bent as well.
Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | General Purpose Motor |
| Manufacturer Part Number | U15P1AF |
| Motor Design | Three-Phase |
| Motor Enclosure Type | Totally Enclosed Fan Cooled |
| Phase | Three |
| Nameplate Horsepower @ 60 Hz | 15 hp |
| Nameplate Voltage @ 60 Hz | 230/460V AC |
| Nameplate RPM @ 60 Hz | 3518 RPM |
| Full Load Amps @ 60 Hz | 35.0/17.4 A |
| Nameplate Service Factor @ 60 Hz | 1.25 |
| Frame Family | NEMA 210 |
| Frame Size | 215T |
| Frequency | 60/50 Hz |
| Number of Speeds | 1 |
| Motor Thermal Protection | None |
| Insulation Class | F |
| Mounting Type | Rigid Base |
| Motor Shaft Rotation | CW/CCW |
| Output Shaft (Dia x L) | 1-3/8 in x 3-3/8 in |
| Application | General Purpose |
| Ambient Temperature - Maximum | 40 °C |
| Bearing Type | Ball |
| CC Number | CC030A |
| Duty Cycle | Continuous |
| Frame Material | Aluminum |
| Length Less Shaft | 18-1/4 in |
| Overall Length | 20-1/2 in |
| Mounting Position | Horizontal/Vertical Shaft Down |
| Nameplate RPM @ 50 Hz | 1,725/1,425 RPM |
| Nameplate Voltage @ 50 Hz | 208V AC; 230V AC; 460V AC |
| Nominal Efficiency | 91 % |
| Shaft Design | Keyed |
| Shaft Length | 3-3/8 in |
| Shaft Diameter | 1-3/8 in |