U.S. Motors H10T2B Inverter Duty 10 HP Electric Motor
This U.S. Motors (Nidec) H10T2B is a 10 HP, 3-phase, totally enclosed fan-cooled (TEFC) industrial AC motor built on a 215T frame. Operating at 230/460V AC and 1,775 RPM, it features Class H Inverter Grade insulation and factory-installed AEGIS shaft grounding for variable frequency drive (VFD) protection. Designed for high-demand industrial applications including pumps, blowers, and fans.
Inspection & Condition Notes:
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The motor shaft spins freely by hand. Cosmetic scuffs and surface scratches are present on the exterior frame edges from storage and handling.
Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | General Purpose Motor |
| Manufacturer Part Number | H10T2B |
| Motor Application | General Application |
| Motor Sub Application | Blowers; Fans; Pumps |
| Motor Design | 3-Phase |
| Motor Enclosure Design | Totally Enclosed Fan-Cooled |
| No. of Speeds | 1 |
| HP | 10 hp |
| Nameplate RPM | 1,775 |
| Voltage | 230/460V AC |
| Full Load Amps | 29.1/14.6 A |
| Phase | Three |
| Duty Cycle | Continuous |
| Frame | 215T |
| Hz | 60 Hz |
| Motor Service Factor | 1 |
| Max. Ambient Temp. | 40 °C |
| Motor Thermal Protection | None |
| Ins. Class | H |
| NEMA Design | A |
| Motor Shaft Rotation | CW/CCW |
| Motor Mounting Type | Rigid Base |
| Motor Mounting Position | Horizontal |
| Inverter Rated | Yes |
| Motor Shaft Design | Keyed |
| Motor Frame Material | Cast Iron |
| Shaft Dia. | 1-3/8 in |
| Shaft Length | 3-3/8 in |
| Bearing Protection | Double Shields |
| Length Less Shaft | 15-13/16 in |
| Overall Length | 19-3/16 in |
| Weight | 175 lb |
| Nominal Efficiency | 91.7 % |
| CC Number | CC030A |