This is a U.S. Motors general purpose motor. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The motor shaft spins when turned by hand. There are some cosmetic scuffs and scratches throughout the unit as well as some paint chipping. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Metric Motor |
| Manufacturer Part Number | D10P2D |
| Motor Application | Other General Purpose |
| Motor Design | 3-Phase |
| Motor Enclosure Design | Open Dripproof |
| No. of Speeds | 1 |
| HP | 10 |
| Nameplate RPM | 1,765 |
| Voltage | 230/460VAC |
| Hz | 60/50 Hz |
| Full Load Amps | 26.3-23.8/11.9 A |
| Phase | Three |
| Duty Cycle | Continuous |
| Frame | 215 |
| Motor Service Factor | 1.15 |
| Max. Ambient Temp. | 40 °C |
| Motor Thermal Protection | None |
| Ins. Class | F |
| Motor Shaft Rotation | CCW |
| Motor Mounting Type | Rigid Base |
| Motor Frame Material | Cast Iron |
| Shaft Dia. | 1-3/8 in |
| Shaft Length | 3-3/8 in |
| Nominal Efficiency | 91.7 % |