This is a U.S. Motors D10P1DC (Model HV51) 10 HP 3-phase general purpose AC electric motor. Features a NEMA 213TC frame with C-face flange and rigid base mount, 3507 RPM, 230/460V dual rating, and an open drip proof (ODP) enclosure.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The motor shaft spins when turned by hand.
Defects Noted:
Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | General Purpose Motor |
| Manufacturer Part Number | D10P1DC |
| Motor Design | Three-Phase |
| Motor Enclosure Type | Open Drip Proof |
| Nameplate Horsepower @ 60 Hz | 10 hp |
| Nameplate Voltage @ 60 Hz | 230/460VAC |
| Nameplate RPM @ 60 Hz | 3,507 RPM |
| Full Load Amps @ 60 Hz | 24.1/12.0 A |
| Phase | Three |
| Nameplate Service Factor @ 60 Hz | 1.15 |
| Frame Family | NEMA 210 |
| Frame Size | 213TC |
| Frequency | 60 Hz |
| Number of Speeds | 1 |
| Motor Thermal Protection | None |
| Insulation Class | F |
| Mounting Type | Rigid Base |
| Output Shaft (Dia x L) | 1-3/8 in x 3-1/8 in |
| Application | General Purpose |
| Sub Application | Air Compressor; Fan/Blower |
| Ambient Temperature - Maximum | 40 °C |
| Bearing Lubrication Type | Regreasable |
| CC Number | CC030A |
| Duty Cycle | Continuous |
| Frame Material | Steel |
| Inverter Rating | Inverter Rated |
| Length Less Shaft | 13-1/2 in |
| Overall Length | 16-3/4 in |
| Mounting Position | Horizontal |
| Full Load Amps @ 50 Hz | 24.1/12.0 A |
| Nameplate Horsepower @ 50 Hz | 10 hp |
| Nameplate RPM @ 50 Hz | 3,525 RPM |
| Nameplate Service Factor @ 50 Hz | 1.15 |
| Nameplate Voltage @ 50 Hz | 230/460V AC |
| NEMA Design Class | B |
| Nominal Efficiency | 89.5 % |
| Shaft Design | Keyed |
| Shaft Length | 3-1/8 in |
| Shaft Diameter | 1-3/8 in |
| Usable @ 208V | Usable at 208V |
| Weight | 90 lb |
| Model Number | HV51 |