This is a U.S. Motors oil burner motor. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The motor shaft spins when turned by hand. There are some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Oil Burner Motor |
| Motor Design | Split-Phase |
| Motor Enclosure Design | Totally Enclosed Nonventilated |
| Motor Application | HVAC/R |
| Motor Sub Application | Oil Burner |
| No. of Speeds | 1 |
| HP | 1/3 |
| Nameplate RPM | 1,725 |
| Voltage | 115V AC |
| Hz | 60 Hz |
| Full Load Amps | 4.8 A |
| Phase | Single |
| Duty Cycle | Continuous |
| Frame | 56N |
| Usable @ 208V | No |
| Usable @ 200V | No |
| Motor Service Factor | 1 |
| Motor Thermal Protection | Manual |
| Ins. Class | B |
| Max. Ambient Temp. | 104 °F |
| Motor Shaft Rotation | CW/CCW |
| Motor Frame Material | Steel |
| Motor Mounting Position | Horizontal or Vertical Shaft Up |
| Shaft Length | 2-3/8 in |
| Lead Length | 20 in |
| Shaft Dia. | 1/2 in |
| Removable Base | No |
| Motor Bearings | Ball |
| Body Dia. | 6-1/2 in |
| Motor Flange Type | Flange Mounted |
| Motor Shaft Design | Flat |
| Overall Length | 10-9/16 in |
| Length Less Shaft | 8-1/4 in |
| Weight | 25 lb |
| Extended Thru-Bolts | No |
| Nominal Efficiency | 47.1 % |
| Capacitor Required | No |