This Tsurumi LB-480-62 is a 2/3 HP 115V single-phase submersible dewatering utility pump designed for high durability and continuous duty operation. Featuring a slimline 2-inch discharge design that fits in 8-inch pipes or casings, it utilizes a urethane semi-vortex impeller and dual inside mechanical seal, delivering up to 62.4 GPM max flow and 39.5 feet max head.
We have inspected this item and it powers on when plugged in. We do not have the capability to install the unit to test it any further. There are some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Plug-In Utility Pump |
| Manufacturer Part Number | LB-480-62 (115V) |
| Switch Actuation | No Switch Included |
| Horsepower | 2/3 |
| Max. Motor Speed | 3,255 RPM |
| Rated Voltage | 115V AC |
| Hz | 60 Hz |
| Amps | 5.9 A |
| Phase | 1 |
| Body Material | Aluminum |
| Impeller Material | Urethane Rubber |
| Shaft Seal Material - Pumps | Silicone Carbide |
| Flow Rate @ 5 Ft. of Head | 62 gpm |
| Flow Rate @ 10 Ft. of Head | 57 gpm |
| Flow Rate @ 15 Ft. of Head | 50 gpm |
| Flow Rate @ 20 Ft. of Head | 44 gpm |
| Max. Head | 39.5 ft |
| Min. Sump Pit Dia. | 12 in |
| Minimum Water Depth | 12 in |
| Body Dia. | 7-3/8 in |
| Width at Widest Point | 7-3/8 in |
| Overall Height | 11-1/4 in |
| Max. Diameter Solids | 1/4 in |
| Max. Liquid Temp. | 104 °F |
| Thermal Protection | Automatic |
| Discharge | 2 in MNPT |
| Duty Cycle | Continuous |
| Cord Length | 32 ft |