This Rheem-Ruud EGSP20 commercial electric water heater features a 19.9-gallon tank capacity, 120V operating voltage, and a 1,500W single element design. Built for point-of-use commercial applications, it features a porcelain enamel lined steel tank, rigid polyurethane foam insulation, and surface-mounted automatic temperature control.
This item was removed from the box for inspection. It could not be operationally tested as it requires professional plumbing and electrical installation.
Defects Noted:
Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Electric Water Heater |
| Sub-brand | Commercial Water Heater |
| Manufacturer Part Number | EGSP20 |
| Market | Commercial |
| Operating Voltage | 120V |
| Maximum Delivered Temperature | 170 °F |
| Maximum Recovery Flow Rate | 15 gph @ 40°F |
| Number of Elements | 1 |
| Tank Capacity | 19.9 gal |
| Maximum Water Pressure | 150 psi |
| Overall Width | 19.75 in |
| Overall Depth | 19.75 in |
| Overall Height | 25.12 in |
| Power Consumption | 1,500 W |
| Water Connection Location | Side |
| Current | 12.5 A |
| Phase | Single |
| Recovery Rate @ Rise | 10 gph @ 60°F; 15 gph @ 40°F; 4 gph @ 140°F; 5 gph @ 120°F; 6 gph @ 100°F; 8 gph @ 80°F |
| Thermal Efficiency | Not Rated |
| Tank Diameter | 19.75 in |
| Environment | Indoor |
| Tank Outer Shell Material | Steel |
| Tank Outer Shell Finish | Porcelain Enamel |
| Cold Inlet Size | 3/4 in |
| Hot Outlet Size | 3/4 in |
| Automatic Thermostat | Yes |
| Thermostat Mounting | Surface |
| Overheat Protection | Yes |
| Minimum Delivered Temperature | 110 °F |
| Height to Hot Outlet | 22.62 in |
| Height to Cold Inlet | 5.12 in |
| Tank Insulation Material | Polyurethane |
| Height to T and P Valve | 19.62 in |
| Cold Inlet Type | NPT |
| Hot Outlet Type | NPT |
| Mounting Type | Wall Mounting |