This is a Rheem electric water heater. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. There are some dents around the top and bottom of the tank. There are also some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing. Made in USA.
Technical Specs
| Item | Electric Water Heater |
| Manufacturer Part Number | ELDS30-TB |
| Market | Commercial |
| Operating Voltage | 480VAC |
| Maximum Recovery Flow Rate | 30 gph @ 40°F |
| Number of Elements | 2 |
| Tank Capacity | 28 gal |
| Maximum Water Pressure | 150 psi |
| Overall Width | 23 in |
| Overall Depth | 23 in |
| Overall Height | 30 in |
| Power Consumption | 9,000 W |
| Phase | Single; Three |
| Recovery Rate @ Rise | 10 gph @ 120°F; 12 gph @ 100°F; 15 gph @ 80°F; 20 gph @ 60°F |
| Thermal Efficiency | 92 % |
| First Hour Rating | 43 gal |
| Tank Diameter | 23 in |
| Equivalent BtuH | 30,710 BtuH |
| Element Material | Copper; Magnesium Oxide |
| Tank Outer Shell Material | Steel |
| Tank Outer Shell Finish | Porcelain Enamel |
| Cold Inlet Size | 3/4 in |
| Hot Outlet Size | 3/4 in |
| Automatic Thermostat | Yes |
| Thermostat Mounting | Surface |
| Energy Factor | 0.92 |
| Tank Insulation Material | Polyurethane |
| Cold Inlet Type | NPT |
| Hot Outlet Type | NPT |