This is a Plastec blower. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The fan spins when turned by hand. There are some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
Item | Blower |
Manufacturer Part Number | S10XS4P008 |
OEM Replacement | No |
Replacement For | S10SS4P012 |
Drive Type | Direct Drive |
Wheel Type | Forward-Curved |
Motor Horsepower | 1/4 hp |
Wheel Diameter | 6 in |
Wheel Width | 1-7/8 in |
Airflow @ 0.250 in SP | 40 cfm |
Airflow @ 0.500 in SP | 60 cfm |
Maximum Inlet Air Temperature | 140 °F |
Maximum Ambient Temperature | -13 °F |
Minimum Ambient Temperature | -40 °F |
Bearing Type | Sealed, Permanently Lubricated Ball |
Sound Level | 56 dBA @ 5 ft |
Wheel Material | Plastic |
Housing Material | Plastic |
Nameplate Voltage | 115/230VAC |
Phase | 1 |
Frequency | 60 Hz |
Current | 5.4/2.7 A |
Motor Enclosure | Explosion Proof |
Minimum Fan Speed | 1,725 RPM |
Maximum Fan Speed | 1,725 RPM |
Motor Speed | 1,725 RPM |
Motor Frame Designation | 71 |
Number of Discharge Positions | 2 |
Discharge Position | Bottom Horizontal; Down Blast; Top Horizontal; Up Blast |
Rotation | CCW |
Number of Inlets | 1 |
Inlet Diameter | 2-15/16 in |
Outlet Shape | Round |
Outlet Type | Non-Flanged |
Outlet Diameter | 2-15/16 in |
Housing Height | 18-15/16 in |
Housing Width | 8-5/8 in |
Overall Height | 18-15/16 in |
Overall Width | 8-5/8 in |
Overall Depth | 13-3/4 in |
Shaft Diameter | 14 mm |
Mounting Orientation | Multiposition |
Hazardous Location Application | Yes |
Spark Resistant Construction Type | A |
For Air Type | Clean Air; Contaminated; Damp; Dirty and Dusty; Emergency Smoke Control; High Temperature; Spark Resistant |
Thermal Overload Protection | Yes |