This is an NTN pillow block bearing. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to install the unit to fully test it. There are some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Pillow Block Bearing |
| Manufacturer Part Number | SUCP207-22 |
| Bearing Insert Type | Radial Ball |
| Bearing Insert Material | Stainless Steel |
| Bearing Material Grade | 440C |
| Shaft Locking Type | Set Screws |
| Bore Diameter | 1-3/8 in |
| Mounting Surface to Shaft Center Height | 1-55/64 in |
| Mount Hole Center-to-Center Length | 5 in |
| Base Height | 0.748 in |
| Base Width | 1.889 in |
| Mount Type | Bolt-Through |
| Number of Mount Holes | 2 |
| Mount Hole Size | 0.669 in x 0.827 in |
| Mounting Bolt Size | M14 |
| Housing Material | Stainless Steel |
| Housing Material Grade | Type 304 |
| Housing Material Finish | Chrome Plated |
| Inner Ring Width | 1.689 in |
| Overall Length | 6.574 in |
| Overall Width | 1.889 in |
| Overall Height | 3.7 in |
| Maximum Speed | 3,700 RPM |
| Static Radial Load Capacity | 3,507 lbf |
| Dynamic Radial Load Capacity | 4,519 lbf |
| Closure | Open |
| Seal Type | Contact |
| Seal Material | Silicone |
| Lubricant Material | FDA/USDA-H1 Solid Grease |
| Maximum Temperature | 250 °F |
| Minimum Temperature | -4 °F |
| Resistance Properties | Corrosion Resistant |