This is a Myers sewage ejector pump. Please refer to the technical specifications in the listing for more information.
We have inspected this item and it powers on when plugged in. We do not have the capability to test the unit any further. It appears to have leaked some fluid near the top bolt. There are also some cosmetic scuffs and scratches throughout the unit as well as some paint chipping. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Sewage Ejector Pump |
| Manufacturer Part Number | MW50-11P-01 |
| Switch | Piggyback Tether Float |
| For Media Type | Sewage Water |
| Power Source | Corded Electric |
| Horsepower | 1/2 hp |
| Motor Speed | 1,650 RPM |
| Rated Voltage | 115V AC |
| Phase | Single |
| Frequency | 60 Hz |
| Current | 9 A |
| Motor Housing Material | Cast Iron |
| Volute Material | Cast Iron |
| Impeller Material | Thermoplastic |
| Shaft Seal Material | Carbon/Ceramic |
| Flow Rate @ 10' of Head | 133 gpm |
| Max. Head | 27 ft |
| Max. Dia. Solids | 2 in |
| Max. Media Temp. | 140 °F |
| Duty Cycle | Continuous |
| Cord Length | 20 ft |
| Shaft Seal Type | Single Mechanical |
| Discharge | 2 in FNPT |
| Discharge Orientation | Vertical |
| Min. Sump Pit Dia. | 24 in |
| Hazardous Location Class | Not Rated |
| Requires Control Panel | No Control Panel Required |
| Body Dia. | 11 in |
| Width at Widest Point | 11 in |
| Overall Height | 17 in |