This is a Myers MW50-11P-01 1/2 HP submersible sewage ejector pump. Designed for reliable wastewater and septic handling, this pump features a rugged cast iron motor housing and volute, a 115V single-phase motor drawing 9A, a 20-foot power cord, piggyback tether float switch, and a 2-inch FNPT vertical discharge.
We have inspected this item and it powers on when plugged in. We do not have the capability to install the unit to test it any further. There are some minor cosmetic paint scuffs and surface scratches on the cast iron exterior from handling and storage. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Made in USA.
Technical Specs
| Item | Sewage Ejector Pump |
| Manufacturer Part Number | MW50-11P-01 |
| Series | Myers Sewage Pump |
| Switch | Piggyback Tether Float |
| For Media Type | Sewage Water |
| Power Source | Corded Electric |
| Phase | Single |
| Horsepower | 1/2 hp |
| Motor Speed | 1,650 RPM |
| Rated Voltage | 115V AC |
| Frequency | 60 Hz |
| Current | 9 A |
| Motor Housing Material | Cast Iron |
| Volute Material | Cast Iron |
| Impeller Material | Thermoplastic |
| Shaft Seal Material | Carbon/Ceramic |
| Flow Rate @ 10' of Head | 133 gpm |
| Max. Head | 27 ft |
| Max. Dia. Solids | 2 in |
| Max. Media Temp. | 140 °F |
| Duty Cycle | Continuous |
| Cord Length | 20 ft |
| Shaft Seal Type | Single Mechanical |
| Discharge | 2 in FNPT |
| Discharge Orientation | Vertical |
| Min. Sump Pit Dia. | 24 in |
| Hazardous Location Class | Not Rated |
| Requires Control Panel | No Control Panel Required |
| Body Dia. | 11 in |
| Width at Widest Point | 11 in |
| Overall Height | 17 in |
| Country of Origin | USA |