The Myers MW50-11P-01 is a heavy-duty 1/2 HP submersible sewage pump constructed with cast iron housing for residential and light commercial wastewater applications. It operates on 115V single-phase power, delivers up to 133 GPM flow rate with a 27 ft maximum head.
Inspection & Defect Notes:
We have inspected this item and it powers on when plugged in. We do not have the capability to install the unit to test it any further. Visible paint scrapes and surface scuffs are present along the lower cast iron casing and feet from handling/storage.
Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Sewage Ejector Pump |
| Series | Myers Sewage Pump |
| Manufacturer Part Number | MW50-11P-01 |
| For Media Type | Sewage Water |
| Switch | Piggyback Tether Float |
| Power Source | Corded Electric |
| Horsepower | 1/2 hp |
| Motor Speed | 1,650 RPM |
| Rated Voltage | 115V AC |
| Frequency | 60 Hz |
| Current | 9 A |
| Phase | Single |
| Motor Housing Material | Cast Iron |
| Volute Material | Cast Iron |
| Impeller Material | Thermoplastic |
| Shaft Seal Material | Carbon/Ceramic |
| Flow Rate @ 10' of Head | 133 gpm |
| Max. Head | 27 ft |
| Max. Dia. Solids | 2 in |
| Max. Media Temp. | 140 °F |
| Duty Cycle | Continuous |
| Cord Length | 20 ft |
| Shaft Seal Type | Single Mechanical |
| Discharge | 2 in FNPT |
| Discharge Orientation | Vertical |
| Min. Sump Pit Dia. | 24 in |
| Hazardous Location Class | Not Rated |
| Requires Control Panel | No Control Panel Required |
| Body Dia. | 11 in |
| Width at Widest Point | 11 in |
| Overall Height | 17 in |
| Country of Origin | USA |