This Myers ME45MC-11 submersible effluent pump is constructed with heavy-duty cast iron for reliable performance in effluent, wastewater, and septic transfer applications. Powered by a 1/2 HP motor running on 115V single-phase power, it features a 2-inch FNPT discharge, 20-foot power cord, and auto thermal overload protection.
This unit was removed from packaging for visual inspection and powered on successfully during testing. We do not have the capability to install the unit to test it any further.
Defects Noted:
Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Made in USA: Assembled in the USA as shown on the manufacturer nameplate.
Technical Specs
| Item | Effluent Pump |
| Manufacturer Part Number | ME45MC-11 |
| Series | ME45 |
| For Media Type | Effluent Water |
| Power Source | Corded Electric |
| Phase | Single |
| Rated Voltage | 115V AC |
| HP | 1/2 hp |
| Frequency | 60 Hz |
| Current | 9.0 A |
| Motor Housing Material | Cast Iron |
| Volute Material | Cast Iron |
| Impeller Material | Cast Iron |
| Flow Rate @ 10' of Head | 87 gpm |
| Flow Rate @ 20' of Head | 60 gpm |
| Flow Rate @ 40' of Head | 8 gpm |
| Max. Head | 44 ft |
| Max. Dia. Solids | 3/4 in |
| Max. Media Temp. | 140 °F |
| Switch | None (Manual) |
| Duty Cycle | Continuous |
| Cord Length | 20 ft |
| Impeller Design | Open |
| Discharge | 2 in FNPT |
| Min. Sump Pit Dia. | 18 in |
| Hazardous Location Class | Not Rated |
| Thermal Protection | Auto |
| Requires Control Panel | No Control Panel Required |