This is a Morrill direct drive blower motor. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to install the unit to fully test it. The motor shaft spins when turned by hand. There are some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Direct Drive Blower Motor |
| Manufacturer Part Number | 5100A |
| Motor Enclosure Type | Totally Enclosed Air-Over |
| Mounting Type | Stud |
| Motor Design | ECM |
| Nameplate Horsepower @ 60 Hz | 1/15 hp |
| Nameplate RPM @ 60 Hz | 1,550 RPM |
| Phase | Single |
| Frame Size | 3.3 |
| Nameplate Voltage @ 60 Hz | 115V AC |
| Full Load Current @ 60 Hz | 1.1 A |
| Nameplate Service Factor @ 60 Hz | 1 |
| Body Diameter | 3.3 in |
| Usable @ 208V | Not Usable at 208V |
| Frequency | 60/50 Hz |
| Number of Speeds | 1 |
| Insulation Class | B |
| Motor Shaft Rotation | CWLE |
| Shaft Diameter | 5/16 in |
| Shaft Length | 2-5/8 in |
| Length Less Shaft | 4-1/4 in |
| Nameplate Horsepower @ 50 Hz | 1/15 hp |
| Ambient Temperature - Maximum | 25 °C |
| Nameplate Voltage @ 50 Hz | 115V AC |
| Bearing Type | Ball |
| Overall Length | 6-3/4 in |
| Shaft Design | Flat |
| Product Type | Fan and Blower Motor |
| Weight | 4 lb |
| Duty | Continuous |
| Number of Shafts | 1 |
| Usable @ 200V | Not Usable at 200V |
| Mounting Position | Horizontal/Vertical Shaft Down |
| Sub Application | General Purpose |
| Frame Material | Steel |
| Bolt Circle Diameter | 2-13/16 in |
| Wattage | 52 W |
| Number of Mounting Studs | 4 |
| Mounting Stud Pattern | 2-4/5 in |
| Full Load Amps @ 50 Hz | 1.10 A |
| Nameplate RPM @ 50 Hz | 1,550 RPM |
| Plug Type | Round 2 Pin |