This is a Marathon Motors general purpose motor. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The motor shaft spins when turned by hand. The hooks at the top are slightly bent. There are also some cosmetic scuffs and scratches throughout the unit as well as some paint chipping. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | General Purpose Motor |
| Manufacturer Part Number | 254TTDBD6026 |
| Motor Design | Three-Phase |
| Motor Enclosure Type | Open Drip Proof |
| Nameplate Horsepower @ 60 Hz | 15 hp |
| Nameplate Voltage @ 60 Hz | 230/460V AC |
| Nameplate RPM @ 60 Hz | 1,774 RPM |
| Full Load Amps @ 60 Hz | 37.5/18.8 A |
| Phase | Three |
| Nameplate Service Factor @ 60 Hz | 1.15 |
| Frame Family | NEMA 250 |
| Frame Size | 254T |
| Frequency | 60 Hz |
| Number of Speeds | 1 |
| Motor Thermal Protection | None |
| Insulation Class | F |
| Mounting Type | Rigid Base |
| Motor Shaft Rotation | CW/CCW |
| Output Shaft (Dia x L) | 1-5/8 in x 4 in |
| Application | General Purpose |
| Ambient Temperature - Maximum | 40 °C |
| Bearing Type | Ball |
| CC Number | CC003A |
| Duty Cycle | Continuous |
| Frame Material | Steel |
| Inverter Rating | Inverter Rated |
| Length Less Shaft | 18-5/8 in |
| Overall Length | 22-5/8 in |
| Manufacturers Warranty | 1 yr |
| Mounting Position | Horizontal |
| Nameplate RPM @ 50 Hz | 1478RPM |
| Nameplate Voltage @ 50 Hz | 190/380V AC |
| NEMA Design Class | B |
| Nominal Efficiency | 88.5 % |
| Shaft Design | Keyed |
| Shaft Length | 4 in |
| Shaft Diameter | 1-5/8 in |
| Usable @ 200V | Not Usable at 200V |
| Usable @ 208V | Not Usable at 208V |
| Weight | 272 lb |