This is a Little Giant 520301 (Model 18S-CIM) 1-1/2 HP submersible sewage ejector pump. Designed for continuous wastewater and sewage transfer applications, it features a cast iron housing, non-clog brass impeller, 240V AC single-phase motor, and 3-inch FNPT vertical discharge.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. There are some cosmetic scuffs and scratches throughout the unit. The original factory box shows wear and taping. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Sewage Ejector Pump |
| Series | 18S-CIM |
| Manufacturer Part Number | 520301 |
| For Media Type | Sewage Water |
| Power Source | Corded Electric |
| Phase | Single |
| Rated Voltage | 240V AC |
| Horsepower | 1-1/2 hp |
| Motor Speed | 3,450 RPM |
| Frequency | 60 Hz |
| Current | 15.50 A |
| Motor Housing Material | Cast Iron |
| Volute Material | Cast Iron |
| Impeller Material | Brass |
| Shaft Seal Material | Carbon/Ceramic |
| Flow Rate @ 10' of Head | 160 gpm |
| Max. Head | 64 ft |
| Max. Dia. Solids | 2 in |
| Max. Media Temp. | 140 °F |
| Switch | Not Included |
| Duty Cycle | Continuous |
| Cord Length | 20 ft |
| Shaft Seal Type | Single Mechanical |
| Impeller Design | Non-Clog |
| Discharge | 3 in FNPT |
| Discharge Orientation | Vertical |
| Min. Sump Pit Dia. | 24 in |
| Thermal Protection | Auto |
| Requires Control Panel | No Control Panel Required |
| Motor Design | Permanent Split Capacitor |
| Application | Dewatering; Transfer; Waste Removal |
| Installation | Submersible |
| Body Dia. | 8-1/2 in |
| Width at Widest Point | 13 in |
| Overall Height | 18-3/8 in |