This is a Liberty Pumps effluent pump. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The handle is bent and the plastic on the handle is cracked. There are also some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Effluent Pump |
| Series | XFL |
| Manufacturer Part Number | XFL52M-2 |
| For Media Type | Effluent Water |
| Power Source | Corded Electric |
| HP | 1/2 hp |
| Motor Speed | 3,450 RPM |
| Rated Voltage | 208 to 230V AC |
| Current | 7 A |
| Phase | Single |
| Motor Housing Material | Cast Iron |
| Volute Material | Cast Iron |
| Impeller Material | Cast Iron |
| Shaft Seal Material | Silicon Carbide/Nitrile Rubber |
| Flow Rate @ 10' of Head | 86 gpm |
| Flow Rate @ 20' of Head | 62 gpm |
| Flow Rate @ 40' of Head | 0 gpm |
| Max. Head | 39 ft |
| Max. Dia. Solids | 3/4 in |
| Max. Media Temp. | 104 °F |
| Operation | Automatic |
| Switch | Not Included |
| Duty Cycle | Continuous |
| Cord Length | 25 ft |
| Shaft Seal Type | Double Mechanical |
| Impeller Design | Semi-Open |
| Discharge | 2 in FNPT |
| Requires Control Panel | Control Panel Required |
| Application | Waste Removal |
| Installation | Submersible |
| Body Dia. | 7-3/8 in |
| Width at Widest Point | 11-1/4 in |
| Overall Height | 20-1/8 in |