The Liberty Pumps PRG101A ProVore 1 HP residential submersible grinder pump is designed for residential sewage and wastewater applications. It features a 115V single-phase motor, 2-inch FNPT discharge, heavy-duty cast iron construction, and an automatic piggyback tether float switch. The hardened stainless steel cutter shreds solids to prevent clogging.
Inspection Notes:
This pump was plugged in and confirmed to power on. We do not have the capability to install the unit to test it any further.
Defects Noted:
Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Made in USA.
Technical Specs
| Item | Grinder Pump |
| Manufacturer Part Number | PRG101A |
| Switch Actuation | Tether Float |
| Switch Electrical Connection | Piggyback |
| HP | 1 hp |
| RPM | 3,450 RPM |
| Rated Voltage | 115V AC |
| Hz | 60 |
| Amps | 12 A |
| Phase - Pumps | 1 |
| Motor Type | CSCR |
| Body Material | Cast Iron |
| Impeller Material | Cast Iron |
| Shaft Seal Material - Pumps | Silicone Carbide |
| Off Point | 6-1/2 in |
| On Point | 13.5 in |
| Flow Rate @ 10 Ft. of Head | 42 gpm |
| Flow Rate @ 15 Ft. of Head | 39 gpm |
| Flow Rate @ 20 Ft. of Head | 36 gpm |
| Flow Rate @ 40 Ft. of Head | 15 gpm |
| Max. Head | 50 ft |
| Min. Sump Pit Dia. | 24 in |
| Body Dia. | 11 in |
| Overall Height | 17-3/4 in |
| Cord Length | 10 ft |
| Discharge | 2 in FNPT |
| Overall Length | 13-1/2 in |
| Max. Diameter Solids | 2 in |
| Max. Liquid Temp. | 140 °F |
| Duty Cycle | Intermittent |
| Thermal Protection | Yes |
| Country of Origin | USA |