This Liberty Pumps LSG202A Omnivore 2 HP automatic submersible grinder pump is engineered for demanding commercial and residential sewage applications. Built with a heavy-duty cast iron uni-body housing, 208/230V single-phase motor, piggyback wide-angle tether float switch, and patented V-Slice cutter technology, it efficiently shreds difficult solids into a fine slurry for high-head pumping.
We have inspected this item and we do not have the proper outlet on site to fully test it. The cutter blades spin freely by hand. Full electrical operation could not be tested as the unit requires a 208/230V power connection.
Defects Noted:
Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Made in USA.
Technical Specs
| Item | Grinder Pump |
| Manufacturer Part Number | LSG202A |
| Switch Actuation | Tether Float |
| Switch Electrical Connection | Piggyback |
| HP | 2 hp |
| RPM | 3,450 RPM |
| Rated Voltage | 208/230V AC |
| Hz | 60 |
| Amps | 15 A |
| Phase - Pumps | 1 |
| Motor Type | PSC |
| Body Material | Cast Iron |
| Impeller Material | Stainless Steel |
| Shaft Seal Material - Pumps | Silicon Carbide; Viton |
| Off Point | 8 in |
| On Point | 15 in |
| Flow Rate @ 10 Ft. of Head | 50 gpm |
| Flow Rate @ 15 Ft. of Head | 50 gpm |
| Flow Rate @ 20 Ft. of Head | 50 gpm |
| Flow Rate @ 40 Ft. of Head | 48 gpm |
| Flow Rate @ 60 Ft. of Head | 42 gpm |
| Max. Head | 108 ft |
| Min. Sump Pit Dia. | 24 in |
| Overall Height | 19-1/2 in |
| Cord Length | 25 ft |
| Discharge | 1-1/4 in FNPT |
| Overall Length | 12-1/2 in |
| Max. Diameter Solids | 2 in |
| Max. Liquid Temp. | 140 °F |
| Duty Cycle | Intermittent |
| Country of Origin | USA |