This Liberty Pumps FL72M is a heavy-duty 3/4 HP submersible effluent pump designed for demanding wastewater transfer, STEP systems, and high-head dewatering applications. Built with a durable cast iron body and motor housing, this manual unit operates on 208-230V single-phase power with a 10.5A current rating.
We have inspected this item and we do not have the proper outlet on site to fully test it.
Defects Noted:
Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Made in USA
Technical Specs
| Item | Effluent Pump |
| Series | FL 70 |
| Manufacturer Part Number | FL72M |
| For Media Type | Effluent Water |
| Power Source | Corded Electric |
| Phase | Single |
| Rated Voltage | 208 to 230V AC |
| HP | 3/4 hp |
| Frequency | 60 Hz |
| Current | 10.5 A |
| Motor Housing Material | Cast Iron |
| Volute Material | Cast Iron |
| Impeller Material | Cast Iron |
| Shaft Seal Material | Carbon/Ceramic |
| Flow Rate @ 10' of Head | 91 gpm |
| Flow Rate @ 20' of Head | 83 gpm |
| Flow Rate @ 40' of Head | 62 gpm |
| Max. Head | 78 ft |
| Max. Dia. Solids | 3/4 in |
| Max. Media Temp. | 104 °F |
| Switch | Not Included |
| Duty Cycle | Continuous |
| Cord Length | 10 ft |
| NEC Cord Designation | SJTW |
| Shaft Seal Type | Single Mechanical |
| Impeller Design | Vortex |
| Discharge | 2 in FNPT |
| Min. Sump Pit Dia. | 24 in |
| Hazardous Location Class | Not Rated |
| Includes Alarm | No Alarm Included |
| Requires Control Panel | Control Panel Required |
| Country of Origin | USA |