This is a Liberty Pumps effluent pump. Please refer to the technical specifications in the listing for more information.
We have inspected this item and it powers on when plugged in. We do not have the capability to test the unit any further. The handle is bent. There are also some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Effluent Pump |
| Switch | Piggyback Tether Float |
| Series | FL 50 |
| Manufacturer Part Number | FL51A-2 |
| For Media Type | Effluent Water |
| Power Source | Corded Electric |
| HP | 1/2 hp |
| Rated Voltage | 115V AC |
| Frequency | 60 Hz |
| Current | 12 A |
| Phase | Single |
| Motor Housing Material | Cast Iron |
| Volute Material | Cast Iron |
| Impeller Material | Cast Iron |
| Shaft Seal Material | Carbon/Ceramic |
| Flow Rate @ 10' of Head | 81 gpm |
| Flow Rate @ 20' of Head | 68 gpm |
| Flow Rate @ 40' of Head | 37 gpm |
| Max. Head | 55 ft |
| Max. Dia. Solids | 3/4 in |
| Max. Media Temp. | 104 °F |
| Duty Cycle | Continuous |
| Cord Length | 25 ft |
| NEC Cord Designation | SJTW |
| Shaft Seal Type | Single Mechanical |
| Impeller Design | Vortex |
| Discharge | 2 in FNPT |
| Min. Sump Pit Dia. | 24 in |
| Hazardous Location Class | Not Rated |
| Includes Alarm | No Alarm Included |
| Requires Control Panel | No Control Panel Required |