The Liberty Pumps FL202A-2 is a heavy-duty 2 HP submersible effluent pump engineered for high-head applications, STEP systems, liquid waste transfer, and dewatering. Built with a rugged cast iron housing and epoxy powder coat finish, it operates on single-phase 208-230V power and features an automatic wide-angle piggyback tether float switch with a 25 ft power cord.
We have inspected this item and we do not have the proper outlet on site to fully test it.
Defects Noted: Item exhibits minor cosmetic scuffs and surface scratches on the cast iron exterior housing from handling.
Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Made in USA.
Technical Specs
| Item | Effluent Pump |
| Series | FL 200 |
| Manufacturer Part Number | FL202A-2 |
| For Media Type | Effluent Water |
| Power Source | Corded Electric |
| Phase | Single |
| Rated Voltage | 208 to 230V AC |
| HP | 2 hp |
| Frequency | 60 Hz |
| Current | 15 A |
| Motor Housing Material | Cast Iron |
| Volute Material | Cast Iron |
| Impeller Material | Cast Iron |
| Shaft Seal Material | Silicon Carbide |
| Flow Rate @ 10' of Head | 108 gpm |
| Flow Rate @ 20' of Head | 106 gpm |
| Flow Rate @ 40' of Head | 104 gpm |
| Max. Head | 127 ft |
| Max. Dia. Solids | 3/4 in |
| Max. Media Temp. | 104 °F |
| Switch | Piggyback Tether Float |
| Duty Cycle | Continuous |
| Cord Length | 25 ft |
| NEC Cord Designation | SJOOW |
| Shaft Seal Type | Single Mechanical |
| Impeller Design | Vortex |
| Discharge | 2 in FNPT |
| Min. Sump Pit Dia. | 24 in |
| Hazardous Location Class | Not Rated |
| Includes Alarm | No Alarm Included |
| Requires Control Panel | No Control Panel Required |
| Country of Origin | USA |