This is a Liberty Pumps FL202A-2 FL200-Series 2 HP submersible high-head effluent pump featuring an automatic wide-angle piggyback float switch. Built with heavy cast iron construction, a 2-vane semi-open cast iron impeller, and a 208-230V single-phase motor, it is designed for STEP systems, mound systems, liquid waste transfer, and high-head de-watering applications.
We have inspected this item and we do not have the proper outlet on site to fully test it.
Defects Noted:
Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Made in USA.
Technical Specs
| Item | Effluent Pump |
| Manufacturer Part Number | FL202A-2 |
| Series | FL 200 |
| Switch | Piggyback Tether Float |
| For Media Type | Effluent Water |
| Power Source | Corded Electric |
| Phase | Single |
| Rated Voltage | 208 to 230V AC |
| HP | 2 hp |
| Frequency | 60 Hz |
| Current | 15 A |
| Motor Housing Material | Cast Iron |
| Volute Material | Cast Iron |
| Impeller Material | Cast Iron |
| Shaft Seal Material | Silicon Carbide |
| Flow Rate @ 10' of Head | 108 gpm |
| Flow Rate @ 20' of Head | 106 gpm |
| Flow Rate @ 40' of Head | 104 gpm |
| Max. Head | 127 ft |
| Max. Dia. Solids | 3/4 in |
| Max. Media Temp. | 104 °F |
| Duty Cycle | Continuous |
| Cord Length | 25 ft |
| NEC Cord Designation | SJOOW |
| Shaft Seal Type | Single Mechanical |
| Impeller Design | Vortex |
| Discharge | 2 in FNPT |
| Min. Sump Pit Dia. | 24 in |
| Hazardous Location Class | Not Rated |
| Includes Alarm | No Alarm Included |
| Requires Control Panel | No Control Panel Required |
| Country of Origin | USA |