This is a Leeson gearmotor. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. There are some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing. Made in USA.
Technical Specs
| Item | Gearmotor |
| Manufacturer Part Number | M1125072.00 |
| Shaft Orientation | Parallel |
| Operating Voltage | 90VDC |
| Full Load Current | 1.3 A |
| Motor Type | Permanent Magnet DC |
| Motor Enclosure | Totally Enclosed Nonventilated |
| Nameplate Speed | 61 RPM |
| Maximum Output Speed | 61 RPM |
| Maximum Torque | 113 in-lb |
| Starting Torque | 113 in-lb |
| Input Horsepower | 1/8 hp |
| Overhung Load Capacity | 267 ft-lb |
| Rotation | CW/CCW |
| Base to Center of Shaft | 3.5 in |
| Mounting Orientation | HorizontalVertical with Shaft Down |
| Service Factor | 1 |
| Motor Duty Class | Continuous |
| Thermal Protection | None |
| Motor Insulation Class | F |
| Maximum Ambient Temperature | 40 °C |
| Efficiency | 70.8% |
| Gear Ratio | 29:1 |
| Gear Material | Steel |
| Output Shaft Diameter | 5/8 in |
| Output Shaft Length | 1-1/2 in |
| Keyway Type | Square |
| Keyway Width | 3/16 in |
| Keyway Depth | 1 in |
| Bearing Type | Needle |
| Lubrication | Semi-Fluid Grease |
| Mount Type | Special |
| Mount Hole Center-to-Center Width | 4 in |
| Mount Hole Center-to-Center Length | 1.5 in |
| Overall Length | 11.45 in |
| Length Less Shaft | 9.96 in |
| Overall Width | 4.08 in |
| Overall Height | 6.26 in |