Leeson Washguard Stainless Steel Duck Motor (Model 122206.00 / CZ145T34WC25A)
This 3 HP, 3-phase, 3490 RPM stainless steel washdown motor is engineered specifically for severe-duty food processing, pharmaceutical, and cleanroom applications requiring frequent high-pressure washdowns. Features an all-stainless steel body, 145TC C-face mounting, TEFC enclosure, and dual-voltage 230/460V rating.
Inspection & Condition Notes:
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The motor shaft spins when turned by hand.
Defects Noted:Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Made in USA
Technical Specs
| Item | Washdown Motor |
| Manufacturer Part Number | 122206.00 |
| Motor Application | Washdown |
| Motor Design | 3-Phase |
| Motor Enclosure Design | Totally Enclosed Fan-Cooled |
| No. of Speeds | 1 |
| HP | 3 |
| Nameplate RPM | 3,490 |
| Voltage | 230/460V AC |
| Hz | 60/50 |
| Full Load Amps | 8.0/4.0 A |
| Phase | Three |
| Duty Cycle | Continuous |
| Frame | 145TC |
| Usable @ 208V | No |
| Usable @ 200V | No |
| Motor Service Factor | 1.15 |
| Motor Thermal Protection | Manual |
| Ins. Class | F |
| Max. Ambient Temp. | 40 °F |
| NEMA Design | B |
| Removable Base | Yes |
| Motor Shaft Rotation | CW/CCW |
| Motor Mounting Type | Face |
| Motor Mounting Position | Horizontal |
| Motor Frame Material | Stainless Steel |
| Endshield Material | Stainless Steel |
| Finish | Unfinished |
| Shaft Dia. | 7/8 in |
| Shaft Length | 2-1/4 in |
| Motor Shaft Design | Keyed |
| Conduit Box Location | Exterior |
| Motor Bearings | Ball |
| Bearing Protection | Shaft Shields |
| Overall Length | 13 in |
| Length Less Shaft | 10-7/8 in |
| Body Dia. | 6.5 in |
| Weight | 56 lb |
| Bolt Circle Dia. | 5-7/8 in |
| Drain Plugs | (1) Drain Plugs In Conduit Box, (1) Drain Plugs In Each End Bell |
| Nominal Efficiency | 86.5 % |
| Country of Origin | USA |