This is a Marathon metric motor. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The motor shaft spins when turned by hand. The mounting is cracked/broken on one side and will need to be replaced. There are also some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Metric Motor |
| Manufacturer Part Number | 090LT17FH6419 |
| Motor Design | Three-Phase |
| Motor Enclosure Type | Totally Enclosed Fan Cooled |
| Phase | Three |
| Nameplate Horsepower @ 60 Hz | 2 hp |
| Nameplate Voltage @ 60 Hz | 230/460V AC |
| Nameplate RPM @ 60 Hz | 1,745 RPM |
| Full Load Amps @ 60 Hz | 5.4/2.7 A |
| Nameplate Service Factor @ 60 Hz | 1.15 |
| Frame Size | 90L |
| Frequency | 60/50 Hz |
| Number of Speeds | 1 |
| Motor Thermal Protection | None |
| Insulation Class | F |
| Motor Enclosure | TEFC |
| Mounting Type | Rigid Base; C-Face |
| Motor Shaft Rotation | CW/CCW |
| Output Shaft (Dia x L) | 24 mm x 50 mm |
| Application | General Purpose |
| Ambient Temperature - Maximum | 40 °C |
| Bearing Type | Ball |
| CC Number | CC003A |
| Duty Cycle | Continuous |
| Frame Material | Aluminum |
| Overall Length | 326 mm |
| Inverter Rating | Inverter Rated |
| Length Less Shaft | 276 mm |
| Mounting Position | Horizontal |
| Nameplate Horsepower @ 50 Hz | 2 hp |
| Nameplate Voltage @ 50 Hz | 190/380V AC; 220/415V AC |
| Nameplate RPM @ 50 Hz | 2,885/2,895/2,905/2,835/2,850/2,865 RPM |
| Nominal Efficiency | 86.5 % |
| Full Load Amps @ 50Hz | 5.4/2.7 A |
| Nameplate Service Factor @ 50 Hz | 1.15 |
| Shaft Diameter | 24 mm |
| Shaft Length | 50 mm |
| Usable @ 200V | Not Usable at 200V |
| Usable @ 208V | Not Usable at 208V |
| Weight | 44 lb |