This is a Kohler gasoline engine. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit requires gasoline to run. There are some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Gasoline Engine |
| Manufacturer Part Number | PA-CH395-3031 |
| Engine Series | Command PRO® Series |
| Gross Torque | 13.9 lb-ft |
| Horsepower | 9.5 hp |
| Engine Cycle | 4-Cycle |
| Engine Displacement | 276.94 cc |
| Number of Cylinders | 1 |
| Shaft Orientation | Horizontal |
| Shaft Configuration | Drilled and Tapped 1.1" Deep X 7/16 20 UNF |
| Shaft Diameter | 3/4 in |
| Shaft Length | 3-1/2 in |
| PTO Shaft Diameter | 1 in |
| PTO Shaft Height | 5-1/4 in |
| PTO Shaft Length | 3-1/2 in |
| Shaft Height | 5-1/4 in |
| Shaft Key | 1/4 in |
| Start Type | Recoil |
| Ignition Type | Electronic |
| Overall Depth | 16-13/16 in |
| Overall Depth Facing PTO | 15-7/8 in |
| Overall H Facing PTO | 17-3/4 in |
| Overall Height | 16-11/16 in |
| Overall W Facing PTO | 16-13/16 in |
| Overall Width | 15-7/8 in |
| Maximum Speed | 4,000 RPM |
| Low Oil Shut Down | Yes |
| Muffler | Yes |
| Air Cleaner Type | Quad Clean 4 Stage Heavy Duty Cyclonic |
| Air Filter | Pleated Paper Encased w/Perforated Metal/Foam Pre Cleaner |
| Bearings | Dual Ball |
| Fuel Tank Capacity | 7.4 qt |
| Design | Overhead Valve |
| Rotation | CCW-SE |
| Gear Box | Internal |
| Maintenance Frequency | 100 Hour Oil Change; 200 Hour Replace Air Filter |
| Recommended Use | Industrial/Construction |