The Husqvarna DMS 240 is a powerful, electric diamond core drill rig and stand system designed for medium-duty core drilling in walls, floors, and roofs up to 10 inches in diameter. Powered by a 2400W / 20A 110V motor with a 2-speed gearbox (390/890 RPM), this system features a tiltable column for angle drilling, twin-gear carriage alignment, electronic overload protection, and an integrated vacuum base for rapid setup.
We have inspected this item and we do not have the proper outlet on site to fully test it.
Defects Noted: Item exhibits minor cosmetic scuffs and edge scratches on the base and column from handling and storage.
Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Diamond Coring Rig |
| Core Drill Type | Core Drill Rig |
| Voltage | 100 to 120V AC |
| Horsepower | 2.9 hp |
| Coring Capacity in Concrete | 10 in |
| Current | 20 A |
| Column Height | 39 in |
| Drilling Angles | 60° |
| Max. Spindle Speed | 890 RPM |
| Speed Setting | Variable Speed |
| Anti-Kickback Clutch Type | Mechanical |
| Phase | Single-Phase |
| Tool Weight | 51 lb |
| Adjustable Angle | Yes |
| Application | Core Drilling in Walls, Floors and Roofs Up to 250 mm Diameter |
| Base Length | 21-1/2 in |
| Base Width | 10-1/2 in |
| Column Diameter | 2-1/2 in |
| Core Bit Cap Concrete | 10 in |
| Maximum Core Bit Compatibility | 10 in |
| Maximum Speed | 890 RPM |
| Minimum Spindle Speed | 390 RPM |
| Number of Pieces | 2 |
| Number of Speed Settings | 2 |
| Overall Depth | 24 in |
| Overall Height | 40 in |
| Overall Width | 10-1/2 in |
| Overload Protection Clutch | Yes |
| Power Source | Corded |
| Series | DMS |
| Spindle Decimal Equivalent Screw Size | 1.25 in |
| Spindle Screw Size | 1-1/4 in |
| Spindle Thread Size | 1-1/4"-7 UNC |
| Spindle Travel | 27 in |
| Water Inlet Port | Yes |