This is a Husqvarna diamond coring rig. Please refer to the technical specifications in the listing for more information.
We have inspected this item and it powers on when plugged in. We do not have the capability to test the unit any further. There are some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Diamond Coring Rig |
| Core Drill Type | Core Drill Rig |
| Voltage | 110VAC |
| Horsepower | 2.3 hp |
| Coring Capacity in Concrete | 6 in |
| Current | 15 A |
| Column Height | 31 in |
| Drilling Angles | 60° |
| Max. Spindle Speed | 800 RPM |
| Speed Setting | No |
| Anti-Kickback Clutch Type | Mechanical |
| Phase | Single-Phase |
| Tool Weight | 51 lb |
| Adjustable Angle | Yes |
| Application | Core Drill Rig for the Rental Shop or Professional |
| Base Length | 20-5/8 in |
| Base Width | 10-1/2 in |
| Column Diameter | 2-1/2 in |
| Core Bit Cap Concrete | 6 in |
| Maximum Core Bit Compatibility | 6 in |
| Maximum Speed | 540 RPM |
| Minimum Spindle Speed | 800 RPM |
| Number of Speed Settings | Continuous |
| Overall Depth | 19 in |
| Overall Height | 33 in |
| Overall Width | 10-1/2 in |
| Overload Protection Clutch | Yes |
| Power Source | Corded |
| Series | DMS |
| Spindle Decimal Equivalent Screw Size | 1.25 in |
| Spindle Screw Size | 1-1/4 in |
| Spindle Thread Size | 1-1/4"-7 |
| Spindle Travel | 19-1/2 in |
| Water Inlet Port | Yes |