The Honda WB30XT3 is a heavy-duty 3-inch centrifugal water pump engineered for general water transfer, drainage, and irrigation. Powered by a commercial-grade Honda GX160 163cc gas engine, this pump delivers up to 290 GPM flow rate with an 85 ft maximum head and 26 ft suction lift.
Inspection & Condition Notes:
This unit shows signs of prior use with cosmetic scuffs and scratches on the top red engine tank/housing, as well as dirt and surface residue on the frame and pump body. The engine could not be run-tested due to a lack of fuel at our inventory facility.
Defects Noted:
Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Engine Driven Pump |
| Manufacturer Part Number | WB30XT3 |
| Series | Honda Water Pumps |
| For Media Type | Trash Water |
| Pump Mechanism | Centrifugal |
| Power Source | Gas Engine |
| Horsepower | 4-4/5 hp |
| Engine Displacement | 163 cc |
| Engine Brand & Series | Honda GX160 |
| Ignition Type | Recoil-Start |
| Volute Material | Cast Iron |
| Frame Material | Steel |
| Seal Material | Silicon Carbide |
| Flow Rate @ 10 Ft. of Head | 290 gpm |
| Flow Rate @ 20 Ft. of Head | 235 gpm |
| Flow Rate @ 40 Ft. of Head | 170 gpm |
| Flow Rate @ 60 Ft. of Head | 95 gpm |
| Flow Rate @ 80 Ft. of Head | 20 gpm |
| Max. Head | 85 ft |
| Max. Suction Lift | 26 ft |
| Max. Self-Priming Lift | 25 ft |
| Max. Discharge Pressure | 37 psi |
| Max. Dia. Solids | 3/8 in |
| Max. Media Temp. | 130 °F |
| Tank Capacity | 0.82 gal |
| Frame Design | Roll Cage |
| Impeller Design | Open |
| Overall Length | 20 in |
| Overall Width | 15 in |
| Overall Height | 18 in |
| Max. Motor Speed | 3,750 RPM |
| Pump Discharge | 3 in MNPT |
| Pump Inlet | 3 in MNPT |
| Body Material | Aluminum |