This is a Goulds Water Technology effluent pump. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the proper outlet on site to fully test it. The plug is bent/damaged and may need to be repaired/replaced. There are also some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Effluent Pump |
| Manufacturer Part Number | WE0712H |
| Switch Actuation | No Switch Included |
| Switch Electrical Connection | No Switch Included |
| HP | 3/4 |
| RPM | 3,450 RPM |
| Rated Voltage | 230V AC |
| Hz | 60 Hz |
| Phase - Pumps | 1 |
| Amps | 10 A |
| Body Material | Cast Iron |
| Impeller Material | Cast Iron |
| Shaft Seal Material - Pumps | Nitrile Rubber; Stainless Steel; Silicon Carbide |
| Flow Rate @ 10 Ft. of Head | 93 gpm |
| Flow Rate @ 15 Ft. of Head | 89 gpm |
| Flow Rate @ 20 Ft. of Head | 83 gpm |
| Flow Rate @ 40 Ft. of Head | 45 gpm |
| Flow Rate @ 60 Ft. of Head | 10 gpm |
| Max. Head | 67 ft |
| Min. Sump Pit Dia. | 18 in |
| Minimum Water Depth | 18 in |
| Body Dia. | 11-3/4 in |
| Width at Widest Point | 8-1/2 in |
| Overall Height | 16 in |
| Cord Length | 20 ft |
| Discharge | 2 in FNPT |
| Max. Diameter Solids | 3/4 in |
| Max. Liquid Temp. | 140 °F |
| Duty Cycle | Continuous |
| Alarm Included | No |
| Thermal Protection | Thermal Protection |