This is a Goulds Water Technology grinder pump. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. There are some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing. Made in USA.
Technical Specs
| Item | Grinder Pump |
| Manufacturer Part Number | RGS2012 |
| Switch Actuation | No Switch Included |
| Switch Electrical Connection | No Switch Included |
| HP | 2 hp |
| RPM | 3,450 RPM |
| Rated Voltage | 208/230V AC |
| Hz | 60 |
| Phase - Pumps | 1 |
| Amps | 15 A |
| Motor Type | Capacitor Start |
| Body Material | Cast Iron |
| Impeller Material | Bronze |
| Shaft Seal Material - Pumps | Buna-N; Silicon Carbide; Stainless Steel |
| Off Point | 6-1/2 in |
| On Point | 18 in |
| Flow Rate @ 10 Ft. of Head | 42 gpm |
| Flow Rate @ 15 Ft. of Head | 41 gpm |
| Flow Rate @ 20 Ft. of Head | 41 gpm |
| Flow Rate @ 40 Ft. of Head | 39 gpm |
| Flow Rate @ 60 Ft. of Head | 35 gpm |
| Max. Head | 101 ft |
| Min. Sump Pit Dia. | 24 in |
| Body Dia. | 11-1/4 in |
| Overall Height | 18-1/2 in |
| Cord Length | 20 ft |
| Discharge | 1-1/4 in FNPT |
| Overall Length | 11-1/4 in |
| Max. Diameter Solids | 3 in |
| Max. Liquid Temp. | 104 °F |
| Duty Cycle | Continuous |
| Thermal Protection | Yes |