This is a Franklin Electric multi-stage booster pump. Please refer to the technical specifications in the listing for more information.
We have inspected and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The shaft spins when turned by hand. There are some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Multi-Stage Booster Pump |
| Manufacturer Part Number | 95830720 |
| Pump Housing Material | Stainless Steel |
| Horsepower | 1 hp |
| RPM (Maximum) | 3,450 RPM |
| Phase | Single |
| Motor Enclosure | Open Dripproof |
| Nameplate Voltage | 115/230VAC |
| Flow Rate @ 100 psi | 10 gpm |
| Shut Off Pressure | 260 psi |
| Intake and Discharge Size | 1 in , 1 in |
| Connection Type | NPT |
| Mounting Orientation | Horizontal |
| For Use With Potable Systems | Yes |
| Number of Stages | 14 |
| Compatible Intake Pipe Size | 1 in |
| Compatible Discharge Pipe Size | 1 in |
| Discharge Type | NPT |
| Case Pressure (Maximum) | 375 psi |
| Best Efficiency Pressure | 177 psi |
| Overall Height | 9.09 in |
| Overall Length | 31.12 in |
| Impeller Material | Celcon |
| Overall Width | 6.5 in |
| Motor Ambient Temperature (Maximum) | 104 °F |
| Wetted Material | Carbon; Cast Iron; Ceramic; Stainless Steel; Viton |
| Compatible with Media Type | Water |
| Seal Material | Buna-N; Ceramic; Phenolic; Stainless Steel |
| Media Temperature (Maximum) | 120 °F |
| Pumping Application | Boosting Water Pressure from City Mains or Private Water Systems; Evaporative Cooling System Misters Water Circulation; Filtration; General Purpose Plumbing; Lawn and Crop Irrigation; Poultry Houses; Pressure Washing Buildings and Floors; Reverse Osmosis; Spray Cooling Equipment |
| Motor Ambient Temperature (Minimum) | 40 °F |
| Duty Cycle | Continuous |
| Thermal Overload Protection | Yes |
| Frequency | 60 Hz |
| Flow Rate @ 160 psi | 7.5 gpm |
| Flow Rate @ 120 psi | 9.5 gpm |
| Flow Rate @ 140 psi | 8.5 gpm |
| Flow Rate @ 180 psi | 7 gpm |
| Flow Rate @ 200 psi | 5.5 gpm |
| Suction Lift (Maximum) | 10 ft |
| Priming | Manual |
| Series | BT4 |