This is a Franklin Electric submersible pump motor. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The shaft spins when turned by hand. There are some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Submersible Pump Motor |
| Manufacturer Part Number | 2145079004GS |
| Motor Application | Pumps |
| Motor Sub Application | Water Wells |
| Phase | Single |
| Motor Design | Capacitor-Start/Run |
| HP | 3/4 |
| Nameplate RPM | 3,450 |
| Voltage | 230V AC |
| Full Load Amps | 6.8 |
| Max. SF Amps | 8 |
| Hz | 60 |
| Motor Service Factor | 1.15 |
| Motor Thermal Protection | Built-In Lightning Arrestor |
| Ins. Class | B |
| Max. Ambient Temp. | 86 °F |
| Duty Cycle | Continuous |
| Motor Shaft Rotation | CCW |
| Motor Enclosure Design | Hermetically Sealed |
| Motor Mounting Type | NEMA Pump Mounting |
| Motor Mounting Position | Vertical Shaft Up |
| Number of Wires | 3 |
| Lead Length | 4 ft |
| Shaft Material | Nitrile Rubber |
| Motor Shaft Design | Splined |
| Thrust Rating | 300 lb |
| Bolt Circle Dia. | 2-7/8 in |
| Motor Bearings | Kingsbury |
| Height | 12-1/8 in |
| Overall Length | 10-5/8 in |
| Length Less Shaft | 10-16/25 in |
| Body Dia. | 3.8 in |
| Stator Type | Hermetically Sealed |
| Weight | 21 lb |
| Diaphragm Type | Pressure Equalizing |
| Overload Relay Required | No |
| Overload Relay Amp Setting | 6.8 A |
| Overload Relay Max. Amp Setting | 8 A |
| Starter Required | No |