This is a Finish Thompson DB15P-M209 sealless magnetic drive centrifugal pump close-coupled to a WEG 3 HP 208-230/460V 3-phase TEFC electric motor. Designed for chemical process safety and superior corrosion resistance, this pump features a heavy-duty polypropylene housing, 2 in FNPT intake, and 1-1/2 in MNPT discharge port.
Inspection & Testing Notes:
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The motor fan spins when turned by hand. There are some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Magnetic Drive Pump |
| Manufacturer Part Number | DB15P-M209 |
| Bearing Type | Radial; Thrust |
| Chemical Compatibility | Deionized Water |
| Horsepower | 3 hp |
| Motor Speed (Maximum) | 3,450 RPM |
| Nameplate Voltage | 208-230/460V AC |
| Discharge Pipe Size | 1-1/2 in |
| Discharge Pipe Type | MNPT |
| Max. ft. of Head | 98 ft |
| Max. Flow Rate @ 9 ft of Head | 130 gpm |
| Max. Flow Rate @ 6 ft of Head | 130 gpm |
| Max. Flow Rate @ 50 ft of Head | 125 gpm |
| Max. Flow Rate @ 40 ft of Head | 130 gpm |
| Full Load Current | 8-7.6/3.8 A |
| Max. Flow Rate @ 3 ft of Head | 130 gpm |
| Max. Flow Rate @ 24 ft of Head | 130 gpm |
| Max. Flow Rate @ 18 ft of Head | 130 gpm |
| Max. Flow Rate @ 15 ft of Head | 130 gpm |
| Gasket Material | Viton |
| Housing Material | Polypropylene |
| Impeller Material | Polypropylene |
| Intake Pipe Size | 2 in |
| Intake Pipe Type | FNPT |
| Max. Fluid Temperature | 180 °F |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Motor Mounting Type | Horizontal |
| Max. Viscosity | 100 cps |
| Max. Discharge Pressure | 90 psi |
| Series | DB15 |
| Priming | Manual |
| Phase | Three |
| Overall Width | 9.7 in |
| Overall Length | 20.5 in |
| Overall Height | 10.8 in |
| Motor Type | Induction |
| Max. Specific Gravity | 1.8 |
| Suction Port | 2 in FNPT |
| Discharge Port | 1-1/2 in MNPT |
| Mounting Location | Open Air |
| Mounting Orientation | Horizontal |
| Country of Origin | USA |
| Impeller Diameter | 5.13 in |