U.S. Motors 3/4 HP direct drive fan and blower motor (Model K55HXABW-1151). Features 1680 RPM operation on 115/230V AC single-phase power, 48Z frame, open air-over enclosure, and all-angle mounting capability.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The motor shaft spins when turned by hand. There are some cosmetic scuffs and scratches throughout the unit.
Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Direct Drive Fan Motor |
| Motor Application | HVAC/R |
| Motor Sub Application | Direct Drive |
| Motor Design | Permanent Split Capacitor |
| Motor Enclosure Design | Open Air-Over |
| No. of Speeds | 1 |
| HP | 3/4 |
| Nameplate RPM | 1,680 |
| Voltage | 115/230VAC |
| Hz | 60 Hz |
| Full Load Amps | 8.2/4.1 A |
| Phase | Single |
| Frame | 48Z |
| Usable @ 208V | No |
| Usable @ 200V | No |
| Motor Thermal Protection | Auto |
| Motor Service Factor | 1 |
| Ins. Class | B |
| Max. Ambient Temp. | 40 °C |
| Duty Cycle | Continuous |
| Motor Mounting Position | All Angle |
| Number of Shafts | 1 |
| Motor Shaft Rotation | CW/CCW |
| Shaft Dia. | 1/2 in |
| Shaft Length | 3 in |
| Motor Bearings | Ball |
| Motor Shaft Design | Flat |
| Conduit Box Position | F3 |
| Length Less Shaft | 8-7/8 in |
| Mounting Holes | (4) #10-32 |
| Body Dia. | 5-5/8 in |
| Stud Quantity | 4 |
| Bolt Circle Dia. | 5-1/8 in |
| Mounting Stud Location | Shaft End |
| Stud Size | #10-32 |