U.S. Motors 3/4 HP direct drive fan and blower motor (Model K55HXABW-1151). Features 1680 RPM operation on 115/230V AC single-phase power, 48Z frame, open air-over enclosure, and all-angle mounting capability.
Inspection & Defects Noted: We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. Motor shaft spins smoothly by hand. Mounting bracket flange is bent as shown in photos. Motor body and top capacitor cover have paper label and shipping sticker residue.
Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Direct Drive Fan Motor |
| Motor Application | HVAC/R |
| Motor Sub Application | Direct Drive |
| Motor Design | Permanent Split Capacitor |
| Motor Enclosure Design | Open Air-Over |
| No. of Speeds | 1 |
| HP | 3/4 |
| Nameplate RPM | 1,680 |
| Voltage | 115/230V AC |
| Hz | 60 Hz |
| Full Load Amps | 8.2/4.1 A |
| Phase | Single |
| Duty Cycle | Continuous |
| Frame | 48Z |
| Usable @ 208V | No |
| Usable @ 200V | No |
| Motor Thermal Protection | Auto |
| Motor Service Factor | 1 |
| Ins. Class | F |
| Motor Shaft Rotation | CW/CCW |
| Max. Ambient Temp. | 40 °C |
| Motor Mounting Position | All Angle |
| Number of Shafts | 1 |
| Shaft Dia. | 1/2 in |
| Shaft Length | 3 in |
| Motor Bearings | Ball |
| Motor Shaft Design | Flat |
| Conduit Box Position | F3 |
| Length Less Shaft | 8-7/8 in |
| Mounting Holes | (4) #10-32 |
| Body Dia. | 5-5/8 in |
| Stud Quantity | 4 |
| Bolt Circle Dia. | 5-1/8 in |
| Mounting Stud Location | Shaft End |
| Stud Size | #10-32 |