This U.S. Motors direct drive fan motor (Model K55HXABW-1151) is a 3/4 HP, 1680 RPM, single-phase motor. Designed for HVAC/R applications, it operates on 115/230V AC with a 48Z frame, Class F insulation, and an open air-over enclosure.
Inspection & Condition Notes:
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The motor shaft spins smoothly by hand.
Defects Noted:
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Direct Drive Fan Motor |
| Motor Application | HVAC/R |
| Motor Sub Application | Direct Drive |
| Motor Design | Permanent Split Capacitor |
| Motor Enclosure Design | Open Air-Over |
| No. of Speeds | 1 |
| HP | 3/4 |
| Nameplate RPM | 1680 |
| Voltage | 115/230V AC |
| Hz | 60 Hz |
| Full Load Amps | 8.2/4.1 A |
| Phase | Single |
| Duty Cycle | Continuous |
| Frame | 48Z |
| Usable @ 208V | No |
| Usable @ 200V | No |
| Motor Thermal Protection | Auto |
| Motor Service Factor | 1 |
| Ins. Class | F |
| Motor Shaft Rotation | CW/CCW |
| Max. Ambient Temp. | 40 °C |
| Motor Mounting Position | All Angle |
| Number of Shafts | 1 |
| Shaft Dia. | 1/2 in |
| Shaft Length | 3 in |
| Motor Bearings | Ball |
| Motor Shaft Design | Flat |
| Conduit Box Position | F3 |
| Length Less Shaft | 8-7/8 in |
| Mounting Holes | (4) #10-32 |
| Body Dia. | 5-5/8 in |
| Stud Quantity | 4 |
| Bolt Circle Dia. | 5-1/8 in |
| Mounting Stud Location | Shaft End |
| Stud Size | #10-32 |