This Dayton 1XHV7 is a continuous-duty 1/2 HP submersible sump pump designed for dewatering applications. Powered by a 115V AC, 60 Hz single-phase motor running at 3,450 RPM, it delivers up to 75 GPM at 5 ft of head and a maximum head height of 32 ft. It features a durable aluminum body, cast iron base, and a 2-inch FNPT discharge port.
Inspection & Condition Notes:
The unit was removed from packaging and plugged in; the motor powers on and runs. Physical inspection shows that the bottom rim of the base strainer is dented and bent in on one side. Exterior scuffs and scratches are present throughout the housing, and the outer box shows shelf wear.
Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Submersible Sump Pump |
| Manufacturer Part Number | 1XHV7 |
| Switch Actuation | No Switch Included |
| Switch Electrical Connection | No Switch Included |
| HP | 1/2 |
| RPM | 3,450 RPM |
| Rated Voltage | 115V AC |
| Hz | 60 Hz |
| Amps | 4.8 A |
| Body Material | Aluminum |
| Impeller Material | Engineered Polymer |
| Shaft Seal Material - Pumps | Buna-N; Ceramic; Carbon |
| Flow Rate @ 5 Ft. of Head | 75 gpm |
| Flow Rate @ 10 Ft. of Head | 61 gpm |
| Flow Rate @ 15 Ft. of Head | 43 gpm |
| Flow Rate @ 20 Ft. of Head | 30 gpm |
| Max. Head | 32 ft |
| Min. Sump Pit Dia. | 11 in |
| Body Dia. | 10 in |
| Overall Height | 16-1/4 in |
| Discharge | 2 in FNPT |
| Max. Diameter Solids | 1/4 in |
| Max. Liquid Temp. | 104 °F |
| Thermal Protection | Yes |
| Duty Cycle | Continuous |
| Cord Length | 10 ft |
| NEC Cord Designation | SJTW |
| Gauge/Conductor | 18/3 |
| Alarm Included | No |
| Base Material | Cast Iron |