This is a Century general purpose motor. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The motor shaft spins when turned by hand. The capacitor cover is dented and the mounting is bent. There are also some cosmetic scuffs and scratches throughout the unit. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | General Purpose Motor |
| Manufacturer Part Number | V102 |
| Motor Design | Capacitor-Start/Run |
| Motor Enclosure Type | Open Drip Proof |
| Phase | Single |
| Horsepower @ 60 Hz | 2 hp |
| Nameplate Voltage @ 60 Hz | 208-230/115VAC |
| Usable @ 208V | Usable at 208V |
| Nameplate RPM @ 60 Hz | 1,745 RPM |
| Nameplate Service Factor @ 60 Hz | 1.15 |
| Full Load Amps @ 60 Hz | 20.4/10.2-10.0 A |
| Frame Size | 145T |
| Frequency | 60 Hz |
| Insulation Class | B |
| Output Shaft (Dia x L) | 7/8 in x 2-5/16 in |
| Shaft Diameter | 7/8 in |
| Shaft Length | 2-5/16 in |
| Mounting Type | Rigid Base |
| Motor Thermal Protection | None |
| Number of Speeds | 1 |
| Ambient Temperature - Maximum | 40 °C |
| Product Type | General Purpose Motor |
| Application | General Purpose |
| Bearing Type | Ball |
| Duty Cycle | Continuous |
| Frame Material | Steel |
| Length Less Shaft | 12 in |
| Overall Length | 14-5/16 in |
| Shaft Design | Keyed |
| Usable @ 200V | Not Usable at 200V |
| Weight | 42 lb |