This is a Century belt drive motor. Please refer to the technical specifications in the listing for more information.
We have inspected this item and we do not have the capability to fully test it. This unit needs to be hardwired and should be installed by a professional. The motor shaft spins when turned by hand. There are some dents around the unit as well as some cosmetic scuffs and scratches. Please refer to the photos for more information.
This unit only includes what is photographed in the listing.
Technical Specs
| Item | Belt Drive Motor |
| Manufacturer Part Number | RB1204AV1 |
| Motor Application | HVAC/R |
| Motor Sub Application | Belt Drive Fan/Blower |
| Motor Design | Capacitor-Start |
| Motor Enclosure Design | Open Dripproof |
| No. of Speeds | 1 |
| HP | 2 |
| Nameplate RPM | 1,725 |
| Voltage | 115/208-230V AC |
| Hz | 60 Hz |
| Full Load Amps | 19.6/9.8 A |
| Phase | Single |
| Duty Cycle | Continuous |
| Frame | 56H |
| Usable @ 208V | Yes |
| Usable @ 200V | No |
| Motor Service Factor | 1.15 |
| Motor Thermal Protection | Auto |
| Ins. Class | B |
| Max. Ambient Temp. | 104 °F |
| Motor Shaft Rotation | CW/CCW |
| Motor Mounting Type | Cradle Base |
| Motor Mounting Position | Horizontal |
| Motor Frame Material | Steel |
| Shaft Dia. | 5/8 in |
| Shaft Length | 2 in |
| Motor Bearings | Ball |
| Overall Length | 12-13/16 in |
| Length Less Shaft | 10-13/16 in |
| Body Dia. | 6-5/8 in |
| Weight | 43 lb |
| Mounting Stud Pattern | 4-1/8 in x 4-1/8 in |
| Ring to Ring Center | 10-1/2 in |
| Resilient Ring Dia. | 2-1/2 in |